Fencing Guides

A fence is not proof of a boundary. How Sydney owners can check where the line really runs, when it matters, and what to do if the fence sits off it.

A new build is not a replacement job. Here is what changes when there is no old fence on the line: the boundary, the vacant lot next door, and ground levels that are not final yet.

Removing and disposing of an old fence is often the slower half of a replacement. What drives the work, where the waste goes, and what to check in a quote.

Rotten or rusted posts are usually what ends a fence's life. How to tell whether you need one post, a section, or a new fence.

Matching an existing run, agreeing it on a shared boundary, estate and heritage rules, and how dark and light colours actually live in a Sydney yard.

Adding height to an existing Colorbond fence is usually possible, but the posts and footings decide whether it is a good idea. A Sydney fencer walks through sheet extensions, slat toppers, pool-barrier limits and when replacing beats extending.

A Sydney fencing contractor on what is genuinely repairable on a damaged fence, what is not, and how to tell the difference.

How to raise a shared fence replacement with your neighbour, agree the cost, style and timing, and keep access and pets sorted.

How to paint or repaint a timber picket fence in Sydney - preparation, primer, paint choice, timing and the mistakes that cost you an early repaint.

How high a front picket fence can be in Sydney, plus picket spacing, bottom gaps, capping and the council controls to check before you build.

Standard Colorbond gate heights, how wide a single leaf can go, why the opening is not the gate, and how to measure before you order.

Which timber belongs where in a Sydney fence, what H3 and H4 treatment ratings actually mean, and how to choose posts, rails and palings.

Slat sizes, gap spacing, coastal finishes and pool barrier rules - what to know before choosing an aluminium slat fence or screen in Sydney.

Timber paling, Colorbond, slat screening, toppers and height rules - how to pick the privacy fence that actually blocks what is bothering you.

Most Sydney fence replacements take one to three days on site. Here is the day-by-day process and what adds time to the job.

Most Sydney timber fences last 10 to 20 years, and the posts almost always fail first. What really decides the lifespan, and when to replace.

Side access width, bin and mower clearance, hardwood framing, hardware and hanging - how to get a timber side gate that keeps working.

Sliding or swinging, single or double, and how wide to go - what to sort out before ordering a Colorbond driveway gate in Sydney.

A dropped timber gate is a post problem, a frame problem or a hardware problem. Here is how to tell which one you have, and how each is properly fixed.

Stepped or raked? How to run a Colorbond fence down a slope in Sydney, close the gap underneath, and know when the block needs retaining first.